描述
| Category | Sub-Category | Specifications |
|---|---|---|
| Core | Processor | – Arm® Cortex®-M33 @ 150MHz – TrustZone® security – Floating Point Unit (FPU) – Memory Protection Unit (MPU) |
| Interrupts | – Built-in NVIC – Non-Maskable Interrupt (NMI) – Multiple interrupt sources |
|
| Debug | – Serial Wire Debug (SWD) with: • 6 breakpoints • 4 watchpoints • Serial Wire Output (SWO) – System Tick Timer |
|
| On-Chip Memory | Flash | – Up to 256KB with: • Flash accelerator • 256-byte page programming |
| SRAM | – Total 96KB SRAM: • 16KB on code bus • 64KB contiguous on system bus • 16KB USB-dedicated (configurable for general use) |
|
| Security | TrustZone | – Arm TrustZone® enabled |
| Encryption | – PRINCE module for: • Real-time Flash encryption/decryption – CASPER crypto accelerator for: • ECC algorithms |
|
| Crypto Engines | – AES-256 engine – SHA-2 module with dedicated DMA – True Random Number Generator (TRNG) |
|
| PUF | – Physical Unclonable Function (PUF): • Generates/stores 64-4096 bit keys • Hardware key extraction |
|
| Identity | – 128-bit UUID – Secure GPIO – Code Watchdog |
|
| Serial Interfaces | FlexComm | – 9 configurable interfaces (selectable as): • USART • SPI • I2C • I2S |
| I2C | – Supports Fast/Fast+ modes (up to 1Mbps) – Multiple addressing modes |
|
| USB | – USB 2.0 Full-Speed: • Host/Device controller • On-chip PHY • Crystal-less operation (device mode) – USB 2.0 High-Speed: • Host/Device controller • On-chip HS PHY |
| Category | Sub-Category | Specifications |
|---|---|---|
| DMA | Controllers | – DMA0: • 23 channels • 22 programmable triggers – DMA1: • 10 channels • 15 programmable triggers – Both support full memory/peripheral access – Dedicated CAN FD DMA controller |
| CRC Engine | – Supports 3 standard polynomials – DMA-capable |
|
| GPIO | General | – Up to 64 GPIO pins – Fast-access registers (Group A) – DMA support for GPIO ports – 16 programmable functions per pin |
| Interrupts | – 8x Pin Interrupt (PINT): • Rising/falling/both edge detection – 2x GPIO Interrupt (GINT): • AND/OR logic combinations |
|
| Programmable Logic | – PLU for: • Combinational/sequential logic • State machine implementation |
|
| Analog | ADC | – 16-bit ADC with: • 5 diff pairs (10 single-ended) • 2.0 MSPS • Dual independent conversion sequences – Internal temperature sensor |
| Comparator | – 5 input pins – External/internal reference |
|
| Timers | General Purpose | – 5x 32-bit timers: • 4 capture/compare • DMA event generation |
| Advanced PWM | – SCTimer/PWM with: • 8 inputs/10 outputs • 16 capture/match • 16 events • 32 states |
|
| System Timers | – 32-bit RTC: • 1s resolution • Always-on domain • 1ms wakeup timer – 24-bit MRT (4 programmable rates) – WWDT (FRO clocked) – Micro-tick timer (watchdog oscillator) – 42-bit OS timer |
|
| Clock Generation | Sources | – Internal FRO (multiple frequencies) – 32kHz FRO – 1MHz low-power FRO – Crystal oscillator (1-25MHz) – 32.768kHz crystal – External clock input (up to 25MHz) |
| PLLs | – PLL0/PLL1 can exceed CPU speed – No high-freq external clock required |
|
| Monitoring | – Clock output with divider – Frequency measurement unit |
| Category | Sub-Category | Specifications |
|---|---|---|
| Power Management | Power Modes | – Integrated PMU for minimal power consumption – Low-power modes: • Sleep/Deep Sleep (RAM retention) • Power-down/Deep Power-down (RAM + CPU0 retention) |
| Wake-up Sources | – Configurable peripheral interrupts – Micro-tick timer (watchdog oscillator) – RTC (32.768kHz clock) |
|
| Power Monitoring | – Power-On Reset (POR) – Brown-Out Detection (BOD) with: • Independent thresholds • Interrupt/reset generation |
|
| Power Supply | – Internal DC-DC converter – Single supply: 1.8V to 3.6V |
|
| Additional Features | Testing | – JTAG boundary scan support |
| Environmental | – Operating temperature: -40°C to +105°C | |
| Packaging | – HLQFP100 – VFBGA98 – HTQFP64 |
评价
目前还没有评价